ST-620

Thermoptek Smoke Alarm

10 Year Lifetime Battery

Looking for a FireAngel ST‑620 smoke alarm replacement? Either FireAngel's FA6620‑R or FA6615-R smoke alarms can replace your end of life ST-620 without requiring a new base plate or leaving unsightly holes in your ceiling.

Thermoptek

The fastest response to all fire types.

10 Year Warranty

Manufacturer's warranty for peace of mind.

BUY NOW

ST-620

Resources

To ensure you install the right alarm for your home, and one that's compliant with your local fire regulations, review our manual and data sheet or get in touch with our customer service team.

Manual

Installation Support and Guidance.

Datasheet

Specification Detail and Standards.

BUY NOW

ST-620

Set-Up

The ST-620 alarm cannot be interlinked to other alarms in your home, but still offers a high protection against fire. Follow the installation guides to ensure your alarm is installed correctly and test weekly.

Install Guide

Where to install your alarm.

Testing Support

Testing and maintenance support.

BUY NOW
Rapid Alerts to all Fires Thermoptek Technology

Thermoptek technology combines the very latest in optical sensing with thermal enhancement and when compared to single sensor alarms react to fire in under half of the time - meaning you and your family have vital extra time to react.

Thermoptek Technology
Battery Powered Protection 10 Year Battery Included

The unit comes with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensor within the unit will deteriorate after 10 years, so to ensure you're protected we recommend you replace the unit after this time.

10 Year Battery Included
Designed For You Testing Made Simple

As well as allowing easy testing with a sweeping brush from the floor below, this large button also activates our Sleep Easy function which silences low battery chirps for 8 hours - giving you a peaceful night's sleep.

Testing Made Simple

Did you know?

Over 50% of fires start in the kitchen Shop Now

Protect the most dangerous room in your home - the kitchen - by installing a Heat Alarm. Our Kitchen Heat Alarms detect rapid spikes in temperature rather than smoke, which means they're perfect for high fume (e.g. smoke from cooking) and high humidity areas such as your garage and attic.

Shop Now
COMPLETE THE RANGE...

FAQ's

No – the FireAngel HT-630 and ST-620 smoke alarm cannot be interlinked with any other alarm. See our Pro Connected alarm range which allows you to build a network of smoke, heat and carbon monoxide alarms across the whole home.

In order to identify how many alarms to install you need to research the guidelines for fire detection that apply in your local area, using regulations such as Building Regulations or the guidance in BS5839-6, and consider your property type; whether that be private owned, rented, new build, renovated etc. The advice below is purely provided for ‘best practice’ and should not be used independently.

If you live in Scotland find out more about the law in your area on our blog post here. (link to homeowner Scottish regulations blog)

Smoke Alarms: To offer high protection FireAngel advise a smoke alarm within the circulation area of each floor of the property, as well as within the main habitable areas such as bedrooms and living room. It’s important to remember that the sensors in all smoke alarms deteriorate after time, at FireAngel we recommend that smoke alarms are replaced every 10 years.

Heat Alarms (Kitchen Alarms): Heat alarms are the only alarm suitable for use within the kitchen as they’re not affected by cooking fumes like traditional smoke alarms. Over 60 Percent of fires start in the kitchen, with cooking and faulty white goods (fridges and tumble driers) being the main causes. FireAngel recommend a heat alarm is fitted in the kitchen, but you can also fit additional heat alarms in the garage and loft to protect these areas.

Carbon Monoxide (CO) alarms: A Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. Known as the ‘Silent Killer’, carbon monoxide (CO) occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak. FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel-burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home.

Yes – if you install The FireAngel Pro connected range, alongside the Gateway Unit, you will be able to receive instant alerts to any alarm activity on your smartphone/device via the free FireAngel Connected App.

No – the ST-620 has not been designed to be installed in a kitchen as it will react to cooking fumes. For fire detection in your kitchen fit a FireAngel Heat Alarm.

Looking for a FireAngel ST-620 smoke alarm replacement?

Replace your end of life ST-620 alarm with a FireAngel FA6615-R Optical Smoke Alarm with 5 year replaceable batteries or FireAngel FA6620-R Optical Smoke Alarm with 10 year sealed for life battery, without requiring a new base plate or leaving unsightly holes in your ceiling.

Guidance for where to install your smoke, heat and CO alarms can be found below:

Why is my FireAngel smoke alarm beeping?

Where your alarm is installed can trigger nuisance alarms if not correctly placed, for example too close to doors or windows.

Why is my FireAngel smoke alarm beeping?

For more guidance as to where to install your smoke, heat or CO alarm please refer to your alarm’s manual or contact our friendly Customer Support team.